Golf Grip Glue by Fortis
 
FORTIS GOLF GRIP RUBBER CEMENT is a medium viscosity solvent-based adhesive specifically formulated for the manufacture and replacement of golf grips. The final bond line remains soft and flexible, allowing the material to be removed during replacement of golf grips.
 
Applications
For glueing golf grips, a one-way wet stick method is recommended.
 
- Remove existing grip, grip tape, or previous adhesive.
- Ensure the bonded surface is clean, free from dust, oil, and other precious materials.
- Apply GOLF GRIP with a brush to the top segment of the shaft to be covered by the golf grip.
- Place the new grip over the top of the shaft, then massage it into place.
- Ensure that there are no air bubbles in the grip.
 
Allow about 4 hours for the adhesive to dry via this method. GOLF GRIP can also be used as a general-purpose contact adhesive for art and craft applications.
 
Fortis recommend that applicators carry out their adhesion test on their particular substrate before application. GOLF GRIP should not be applied at temperatures below 10°C. Final bond strength is achieved in 24 hours.
 
Surfaces
 
Ensure the bonded surface is clean and free from dust, oil, and other foreign materials. Metal surfaces should be degreased with Fortis Contact Cleaner.
 
SPECIFICATIONS 
Rubber Cement
Long-lasting flexible bond
Easy removal for replacement grips
No Wrinkle
Fast tack
 
Available in 250ml (1 x set of clubs) / 500ml (2 x sets of clubs)